INDUSTRIAL SURFACE

SportMaster · Court diagram

Futsal court

A futsal court in plan, with a second drawing of the penalty area, on a SportMaster title block. The penalty area is drawn as 6M arcs from each goal post joined by a 3.16M straight line, 15.16 M across, around a 3M goal. Marks are placed 6M and 10 M from the goal line, the center circle has a 3M radius, the corner arcs are R=0.25 M, and 5M spacings are marked along the lines. The overall pitch length and width are not printed. The drawing is for planning only.

4921-089 Revised February 24, 2015 1 page, 54 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

Key facts

Penalty area6M arcs joined by a 3.16M line, 15.16 M across
Goal width3M
Marks from the goal line6M and 10 M
Corner arcR=0.25 M
Straight line of the penalty area3.16M

Taken from this document. The PDF is SportMaster's official document (4921-089, revised February 24, 2015).

The document

A drawing is read as a drawing, so this document is shown as its pages. Select a page to open the PDF there. The PDF is SportMaster's official document (4921-089, revised February 24, 2015).

Futsal court in plan with penalty areas made of 6M arcs and a 3.16M line, marks at 6M and 10 M, a 3M center circle and R=0.25 M corners, above a penalty area detail 15.16 M across.

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.