INDUSTRIAL SURFACE

SportMaster · Technical data sheet

SportWax Clear Coat

SportWax Clear Coat is a ready to use, 100% acrylic, clear drying emulsion made as a protective top coat for SportMaster color systems on tennis, basketball and pickleball courts and other multi-purpose sport surfaces. It is not diluted; the recommended method is spray (airless power spray or garden type pump), though a roller, brush or squeegee may be used. The recommended rate is 200-300 sq. ft. per gallon, without puddling, and it is dry to the touch in one hour at 72°F.

CMT-18 Revised December 2019 1 page, 74 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

First page of the SportMaster technical data sheet for SportWax Clear Coat Open the PDF (1 page, 74 KB)

Key facts

UseProtective top coat for SportMaster color systems
MixingReady to use; do not dilute
ApplicationSpray (airless power spray or garden type pump); roller, brush or squeegee also possible
Coverage200-300 sq. ft. per gallon
Drying timeDry to the touch in one hour at 72°F
Application temperatureSurface and air above 50°F (10°C) during application and for at least 24 hours after

Taken from this document. The PDF is SportMaster's official document (CMT-18, revised December 2019).

The full text of this document

This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-18, revised December 2019). If the two ever differ, the PDF is right.

REVISED 12/19 · Technical Data Sheet · SPORTWAX CLEAR COAT · CMT-18

PRODUCT DESCRIPTION & BENEFITS

Sport Wax is a ready to use, 100% acrylic, clear drying emulsion formulated as a protective top coat for SportMaster Color systems.

USES

Tennis courts, Basketball courts, pickleball courts, and other multi-purpose sport systems.

COLOR

Clear when dry.

Chemical Characteristics

ClassificationThermoplastic Acrylic Emulsion
Weight per gallon8.5 ± .5 lbs. per gallon
FlammabilityNon-Flammable
Flash PointNone
Storage LifeKeep liquid from freezing
ColorClear when wet

SURFACE PREPARATION

Surface must be cleaned entirely of dust, dirt, and debris.

MIXING PROCEDURES

Sport Wax is ready to use. DO NOT DILUTE.

APPLICATION

Recommended application is by spray (airless power spray or garden type pump). A roller, brush, or squeegee may also be used. Sport Wax should be applied at the rate of 200-300 sq. ft. per gallon. Do not allow to puddle.

IMPORTANT

Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.

DRYING TIME

Sport Wax will be dry to the touch in one hour at 72°F.

COVERAGE

A coverage rate of 200-300 sq. ft. per gallon is recommended. Coverage rates may be affected by surface porosity.

CLEAN UP

Wash sprayers, tools, etc. in water before material dries.

CAUTIONS

Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.

WARRANTY

The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.

Copyright© 2019, SportMaster
All rights reserved.

ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870

Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.