SportMaster · Technical data sheet
Black Dispersion
Black Dispersion is a water-based pigment dispersion for tinting SportMaster neutral base coatings black, darkening other colors, or tinting running track latexes; the sheet says it also increases the UV protection of acrylic and latex coatings. As a guideline it gives 5-gallons per 55-gallons of running track latex, and generally 1 to 2 gallons per 55 gallons of undiluted Neutral for full color pigmentation. It names the neutral base products it is used with, from Neutral Concentrate to TrackMaster Plus.
CMT-32 Revised December 2019 1 page, 70 KB
This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.
Open the PDF (1 page, 70 KB) Key facts
| Use | Fully pigmenting or darkening SportMaster neutral base coatings; tinting latex running track binders |
|---|---|
| Mix with Neutral Base products | Generally 1 to 2 gallons per 55 gallons of undiluted Neutral for full color pigmentation |
| Mix with running track latex | Standard guideline: 5-gallons per 55-gallons of running track latex |
| Works with | Neutral Acrylic Resurfacer, Neutral Concentrate, ColorPave Systems, SkateMaster and TrackMaster Plus |
| Application temperature | Surface and air above 50°F (10°C) during application and for at least 24 hours after |
Taken from this document. The PDF is SportMaster's official document (CMT-32, revised December 2019).
The full text of this document
This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-32, revised December 2019). If the two ever differ, the PDF is right.
REVISED 12/19 · Technical Data Sheet · BLACK DISPERSION · CMT-32
PRODUCT DESCRIPTION & BENEFITS
Black Dispersion is a water-based pigment dispersion. Black Dispersion can be used for tinting SportMaster Neutral Base coatings to create black colors, or added in smaller amounts to darken other existing colors. Black Dispersion is also commonly used for tinting running track latexes. UV protection of the coating is also increased when adding to acrylic and latex coatings.
USES
Black Dispersion is ideal for fully pigmenting (or darkening) SportMaster neutral base coatings, like Neutral Acrylic Resurfacer, Neutral Concentrate, ColorPave Systems, SkateMaster & TrackMaster Plus. Latex Running Track binders (TrackMaster Pro System) can be tinted black to enhance color and add UV protection.
MIXING PROCEDURES
Level of pigment dispersion usage will vary depending on degree of color tinting desired. A standard guideline is 5-gallons of Black Dispersant to 55-gallons of running track latex. When using to color SportMaster Neutral Base products, generally 1 to 2 gallons of Black Dispersant per 55 gallons of undiluted Neutral are recommended for full color pigmentation.
IMPORTANT
Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.
CAUTIONS
Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.
WARRANTY
The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.
Copyright© 2019, SportMaster
All rights reserved.
ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870
Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net
Free estimates
Planning a court or a surface?
Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.
The yard
4000 East 86th Street, Cleveland, OH 44105
Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.
Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.