SportMaster · Technical data sheet
CushionMaster I
CushionMaster I is the secondary layer of the SportMaster Pro Cushion System, applied after the CushionMaster II coats; it carries fine rubber particles for smooth texturing. The sheet says three coats of CushionMaster II followed by two coats of CushionMaster I are required for standard resiliency. It gives two mixes (55 gallons with 13-14 gallons of water, or 30 gallons with 7-8 gallons), coverage of 0.10 to 0.12 gallons per square yard per coat and a drying time of 30 to 60 minutes.
CMT-23 Revised December 2019 2 pages, 132 KB
This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.
Open the PDF (2 pages, 132 KB) Key facts
| Use | Tennis courts or other asphalt or suitable concrete recreational surfaces, as a resilient course |
|---|---|
| Mix (55 gallons) | Cushion Master 1 55 gallons, Water 13-14 gallons |
| Mix (30 gallons) | Cushion Master 1 30 gallons, Water 7-8 gallons |
| Coats | Three coats of CushionMaster II, then two coats of CushionMaster I, for standard resiliency |
| Coverage | 0.10 to 0.12 gallons per square yard per coat (undiluted) |
| Drying time | Thirty to sixty (30 to 60) minutes under optimum drying conditions |
Taken from this document. The PDF is SportMaster's official document (CMT-23, revised December 2019).
The full text of this document
This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-23, revised December 2019). If the two ever differ, the PDF is right.
REVISED 12/19 · Technical Data Sheet · CUSHIONMASTER 1 · CMT-23
PRODUCT DESCRIPTION & BENEFITS
CushionMaster I is designed as a secondary layer to be applied following coats of CushionMaster II, as part of the SportMaster Pro Cushion System. CushionMaster I features fine rubber particles for smooth texturing.
USES
Tennis courts or any other asphalt or suitable concrete recreational surface as a resilient course for SportMaster Systems.
COLOR
Black when dry.
Chemical Characteristics
% Weight (Nominal)
| Acrylic Emulsion (60% Non Volatile) | 36.12 |
| Organic Filler Material | 14.88 |
| Mineral Inert Fillers | 17.31 |
| Miscellaneous Additives | 4.22 |
| Water | 27.47 |
Product Data
| Type | Acrylic Emulsion |
| Weight per gallon at 77°F | 9.59 ± .5 lbs. |
| % Non Volatile Material | 55.92 ± 5 |
| Odor | Ammonia |
| Flammability | Non-Flammable |
| Flash Point | None |
| Storage Life | One Year |
SURFACE PREPARATION
- As with a standard SportMaster System, surface preparation is extremely important. The surface must be smooth and level. All pavement repairs must be flush with the surrounding surface. The pavement surface must be cleaned entirely of dust, dirt, debris and all loose materials.
- New asphalt surfaces must cure 14-30 days prior to application. Newly cured or rough textured asphalt surfaces should first be coated with Acrylic Resurfacer (Technical Bulletin CMT - 3).
- New Concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. They must never be steel trowelled. Etch surface with phosphoric acid and apply SportMaster Acrylic Adhesion Promoter.
MIXING PROCEDURES
| Cushion Master 1 | 55 gallons |
| Water | 13-14 gallons |
| Cushion Master 1 | 30 gallons |
| Water | 7-8 gallons |
APPLICATION
Use a soft rubber squeegee. Do not apply until preceding coat has dried. Three coats of CushionMaster II followed by two coats of CushionMaster I are required for standard resiliency. Additional coats may be applied for added resiliency. Can also be sprayed with Dual Diaphragm Pump System.
IMPORTANT
Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use. On outdoor concrete surfaces, assure adequate and functional perimeter drains as well as a sound vapor barrier beneath the slab.
DRYING TIME
Thirty to sixty (30 to 60) minutes under optimum drying conditions. Indoor applications are substantially affected by temperature and available ventilation and will dry more slowly.
COVERAGE
0.10 to 0.12 gallons per square yard per coat. Yield is based on undiluted gallons.
CAUTIONS
Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.
WARRANTY
The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.
Page 2
Copyright© 2019, SportMaster
All rights reserved.
ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870
Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net
Free estimates
Planning a court or a surface?
Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.
The yard
4000 East 86th Street, Cleveland, OH 44105
Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.
Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.