INDUSTRIAL SURFACE

SportMaster · Technical data sheet

CushionMaster II

CushionMaster II is the base layer of the SportMaster Pro Cushion System, an acrylic coating with coarse rubber particles for higher cushion build, used on tennis courts and other asphalt or suitable concrete surfaces. The sheet says three coats of CushionMaster II followed by two coats of CushionMaster I are required for standard resiliency. It gives two mixes (55 gallons with 13-14 gallons of water, or 30 gallons with 7-8 gallons), coverage of 0.15 gallons per square yard per coat and a drying time of 3 to 4 hours.

CMT-22 Revised December 2019 2 pages, 132 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

First page of the SportMaster technical data sheet for CushionMaster II Open the PDF (2 pages, 132 KB)

Key facts

UseTennis courts or other asphalt or suitable concrete recreational surfaces, as a resilient course
Mix (55 gallons)Cushion Master II 55 gallons, Water 13-14 gallons
Mix (30 gallons)Cushion Master II 30 gallons, Water 7-8 gallons
CoatsThree coats of CushionMaster II, then two coats of CushionMaster I, for standard resiliency
Coverage0.15 gallons per square yard per coat (undiluted)
Drying time3 to 4 hours under optimum drying conditions

Taken from this document. The PDF is SportMaster's official document (CMT-22, revised December 2019).

The full text of this document

This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-22, revised December 2019). If the two ever differ, the PDF is right.

REVISED 12/19 · Technical Data Sheet · CUSHIONMASTER II · CMT-22

PRODUCT DESCRIPTION & BENEFITS

CushionMaster II is designed as the base layer for the SportMaster Pro Cushion System. CushionMaster II features coarse rubber particles for higher cushion build.

USES

Tennis courts or any other asphalt or suitable concrete recreational surface as a resilient course for SportMaster Systems.

COLOR

Black when dry.

Chemical Characteristics

% Weight (Nominal)

Acrylic Emulsion (60% Non Volatile)36.12
Organic Filler Material14.88
Mineral Inert Fillers17.31
Miscellaneous Additives4.22
Water27.47

Product Data

TypeAcrylic Emulsion
Weight per gallon at 77°F9.59 ± .5 lbs.
% Non Volatile Material55.92 ± 5
OdorAmmonia
FlammabilityNon-Flammable
Flash PointNone
Storage LifeOne Year

SURFACE PREPARATION

As with a standard SportMaster System, surface preparation is extremely important. The surface must be smooth and level. All pavement repairs must be flush with the surrounding surface. The pavement surface must be cleaned entirely of dust, dirt, debris and all loose materials.

  • New asphalt surfaces must cure 14-30 days prior to application. Newly cured or rough textured asphalt surfaces should first be coated with Acrylic Resurfacer (Technical Bulletin CMT-3). Acrylic Resurfacer should be applied on existing Acrylic surfaces to provide texture and ensure consistent application of the rubber granules.
  • New Concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. They must never be steel trowelled. Etch surface with phosphoric acid and apply SportMaster Acrylic Adhesion Promoter.

MIXING PROCEDURES

Cushion Master II55 gallons
Water13-14 gallons
Cushion Master II30 gallons
Water7-8 gallons

APPLICATION

Use a soft rubber squeegee. Do not apply until preceding coat has dried. Three coats of CushionMaster II followed by two coats of CushionMaster I are required for standard resiliency. Addtional coats may be applied for added resiliency. Can also be sprayed with Dual Diaphragm Pump System.

IMPORTANT

Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use. On outdoor concrete surfaces, assure adequate and functional perimeter drains as well as a sound vapor barrier beneath the slab.

DRYING TIME

3 to 4 hours under optimum drying conditions. Indoor applications are substantially affected by temperature and available ventilation and will dry more slowly.

COVERAGE

0.15 gallons per square yard per coat. Yield is based on undiluted gallons.

CAUTIONS

Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.

WARRANTY

The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.

Page 2

Copyright© 2019, SportMaster
All rights reserved.

ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870

Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.