SportMaster · Technical data sheet
Ready-Mix Color
Ready-Mix Color is a 100% acrylic emulsion color coating for tennis, basketball and pickleball courts and other asphalt or concrete multi-purpose surfaces. It comes ready to use: the sheet says not to add water, only to stir it thoroughly, and to apply two coats with a soft rubber squeegee. Coverage is approximately .12 to .15 gallon per square yard per coat; it dries in 30 to 60 minutes, with 48 hours before foot traffic or play. It also lists the colors and the surface preparation for asphalt and concrete.
CMT-37 Revised December 2019 1 page, 79 KB
This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.
Open the PDF (1 page, 79 KB) Key facts
| Use | Tennis, basketball and pickleball courts and other asphalt or concrete multi-purpose surfaces |
|---|---|
| Mixing | Ready to use, do not add water; stir thoroughly |
| Application | Soft rubber squeegee, two coats recommended |
| Coverage | Approximately .12 to .15 gallon per square yard per coat |
| Drying time | 30 to 60 minutes; 48 hours before foot traffic or play |
| Colors | Dark Green, Forest Green, Light Green, Red, Beige, Blue, Brown (Field Mixed), Gray and Maroon |
Taken from this document. The PDF is SportMaster's official document (CMT-37, revised December 2019).
The full text of this document
This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-37, revised December 2019). If the two ever differ, the PDF is right.
REVISED 12/19 · Technical Data Sheet · READY-MIX COLOR · CMT-37
PRODUCT DESCRIPTION & BENEFITS
SportMaster Ready-Mix Color is a 100% acrylic emulsion coating designed for tennis courts and other sport and recreational pavement surfaces.
USES
Tennis courts, basketball courts, pickleball courts, and other asphalt or concrete multi-purpose surfaces.
COLOR
Available in Dark Green, Forest Green, Light Green, Red, Beige, Blue, Brown (Field Mixed), Gray, and Maroon.
Product Data
| Type | Acrylic |
| Odor | Slight Ammonia |
| Flammability | Non-Flammable |
| Flash Point | None |
| Colors | Several Available |
SURFACE PREPARATION
Pavement surface must be cleaned entirely of dust, dirt, debris and all loose materials. Repair of pavement surface defects, depressions and cracks must be completed prior to application. All repairs must be flush and smooth to adjoining surfaces.
New asphalt surfaces must cure 14 to 30 days prior to application. It is recommended to apply Acrylic Resurfacer (Technical Bulletin CMT3) as required by surface roughness and porosity to provide a smooth, dense underlayment for application of color texture and finish coats.
New concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. They must never be steel trowelled. Etch surface with Muriatic or Phosphoric Acid and apply SportMaster Adhesion Promoter prior to color coating.
MIXING PROCEDURES
Ready-Mix Color is ready to use. Do not add water. Stir thoroughly prior to application. A power drill and paddle mixer are recommended.
APPLICATION
Apply Ready-Mix Color with a soft rubber squeegee. Allow each coat to thoroughly dry before applying the next coat. Two coats are recommended.
IMPORTANT
Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.
COVERAGE
Approximately .12 to .15 gallon per square yard per coat.
DRYING TIME
Ready-Mix Color dries in 30 to 60 minutes under optimum drying conditions. Allow 48 hours before allowing foot traffic or play.
CAUTIONS
Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.
WARRANTY
The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.
Copyright© 2019, SportMaster
All rights reserved.
ThorWorks Industries, Inc. P.O. Box 2277 Sandusky, OH 44870 Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net
Free estimates
Planning a court or a surface?
Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.
The yard
4000 East 86th Street, Cleveland, OH 44105
Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.
Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.