INDUSTRIAL SURFACE

SportMaster · Guide

Tennis court surfacing and repair: recommended tools and equipment

A numbered list, 1 to 22, of the tools and equipment SportMaster recommends for a tennis court surfacing and repair crew, both necessary and optional. It runs from the truck, drum cart and mixing gear (agitated tanks, or an electric drill of 1 ½ HP or larger with a paddle of approx. 30 inches) through a blower of at least 5 horsepower, line taping machine, scrapers, squeegees and straight edges to pails, tarps, drums, a water and power source and caution tape. It suggests approx. 8 rolls of masking tape per tennis court.

3 pages, 115 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

Key facts

Mixing drillElectric drill, 1 ½ HP or larger, with a long paddle mixer (approx. 30 inches)
BlowerAt least 5 horsepower
Masking tapeApprox. 8 rolls per tennis court
Tape measuresTwo 100 foot tape measures, preferably steel, same make and model
PailsClean empty 5-gallon pails, plus a smaller approx. 2-gallon pail for dipping and splitting

Taken from this document. The PDF is SportMaster's official document.

The document, 3 pages

This document is read from its lists and columns, so it is shown here exactly as printed, page by page. Select a page to open the PDF there. The PDF is SportMaster's official document.

First page of the SportMaster guide for Tennis court surfacing and repair: recommended tools and equipment Page 2 of Tennis court surfacing and repair: recommended tools and equipment Page 3 of Tennis court surfacing and repair: recommended tools and equipment

The sheet as plain text

The same sheet as text, taken from the PDF by machine with every column left where it stands. It is here for searching, for copying and for screen readers; read the tables from the pages above.

Show the plain text (3 pages)

Page 1

  Tennis Court Surfacing & Repair: Recommended Tools
                     And Equipment

This tennis court surfacing and repair industry is very unique. Tennis court surfacing and repair
can be accomplished with a relatively low investment, in comparison to other trades. The right
tools and equipment can help a good contractor achieve a quality tennis court surfacing job, in
a safe and timely manner. The following list contains both necessary items and optional items
that make the tennis court surfacing and repair process easier, quicker or cleaner.

   1. Truck: Preferably, a flatbed truck with side racks and a hydraulic lift gate for loading and
      unloading surfacing material drums. A trailer that is low to the ground can also be
      utilized for transporting drums to the jobsite. Court surfacing materials can be mixed on
      the trailer, without removing heavy drums.
   2. Drum Cart: Heavy duty 2‐wheel cart for moving drums of court surfacing material. A
      good drum cart has a sliding hook and secures the top of the drum, to keep drum secure
      on cart.
   3. Mixing Equipment: For Tennis Court Surfacing and Repair Materials
           a. Agitated tanks – SportMaster Color Mixing Machines
           b. Electric Drill: 1 ½ HP or larger, with long paddle mixer (approx. 30 inches) to
              reach bottom of drums.
   4. Blower: At least 5 horsepower for removing debris, prior to surfacing.
   5. Edging tool: Billy Goat Grazor, Little Wonder Pro Edger, or weed wacker to remove
      vegetation around court, and prevent from hanging into the court, prior to court repairs
      and surfacing.
   6. Line Taping Machine: Dispenses masking tape for line painting, after surfacing coats.
           a. Striping accessories:
                    i. 2” to 3” paint roller & threaded handle (or paint brush)
                   ii. Good quality masking tape (approx. 8 rolls per tennis court)
   7. Scrapers: Wide scrapers for scraping the court surface before and after each coat of
      surfacing material is applied, (SportMaster Super Scraper).
   8. Broom: Stiff street brooms for cleaning.
   9. Sport Application Squeegee: For tennis court surfacing material application.

Page 2

10. Patching Straight Edges: Available from SportMaster in various lengths (always use
    straight edge wider that area in need of repair). Steel screed, for patching/leveling low
    spots (bird baths) on court surface.
11. Shovels: For picking up excess surfacing materials from court surfaces.
12. Two 100 foot Tape Measures: preferably steel, same make and model.
13. Chalk Line: For line/striping layout.
14. Chalk or Soap Stones: Markings.
15. Clean Empty Pails (5‐gallon):
        a. For mixing court surfacing materials and patching mixes.
        b. For transporting patching, repair, and surfacing materials.
                 i. SportMaster “Sealer Wheeler” is also helpful for transporting court
                    surfacing material onto court during application process.
        c. A smaller (approx. 2‐gallon) pail is helpful for dipping into drums and splitting
            repair and surfacing materials, when mixing with drill and paddle mixer.
16. Masking Tape:
        a. For marking corners of playing areas on two‐tone courts, to preserve existing
            lines and eliminate having to layout lines from scratch, after surfacing.
17. Roofing Paper (rolls): Tape down at the end of a tennis court insert to collect extra
    surfacing materials, for ease of removal by shovel.
18. Tarp: For mixing area on jobsite and entry area to courts. Prevents drips and splatter of
    surfacing and repair materials from getting on the ground.
19. Empty Drums:
        a. Clean drums for mixing court repair and surfacing materials
        b. Extra drums for cleaning tools and collecting wastewater
20. Rags: For cleanup and to fill Net Post Sleeves prior to surfacing (prevents filling sleeves
    with coatings).
21. Other Tools & Equipment:
        a. Wrench and Socket: For opening/closing lids on drums.
        b. Water Hoses & Spray Nozzle: For dilution & cleaning.
        c. Garden‐Type pump sprayer: For spraying Acrylic Adhesion Promoter (on new
            concrete courts) and good for misting hot court surfaces in front of application,
            to cool surface.
        d. Pressure Washer & cleaning supplies: Tri Sodium Phosphate (TSP) for cleaning
            detergent, and bleach to remove fungus, moss & mold, when needed. Visit
            www.sportmaster.net for maintenance and cleaning manual.
        e. Water Source: Make sure locate/secure on‐site water or bring clean water for
            pressure washing, cleaning, and dilution of repair and surfacing products.

Page 3

        f. Power Source: Make sure to locate/secure on‐site electric or bring a generator
           to power the drill for mixing court surfacing and repair materials.
        g. Pail Openers: For efficient opening of pails.
        h. Trowel/Putty Knife: For application of acrylic trowel grade crack fillers and
           repair products.
        i. V or U‐shaped Squeegee: To apply Acrylic Patch Binder mix into cracks and areas
           where surface repair is needed.
        j. Box Cutter: Use to open boxes, cut pour spouts on jugs, etc.
        k. Wire Brush: Helpful for cleaning surfacing materials that are dried on tools, and
           to remove stubborn vegetation in cracks, prior to repair.
        l. Work Gloves: Hand Protection
        m. Dust Mask: Use for air safety when pouring silica sand into surfacing materials.
22. Caution Tape: Secure the courts after application to prevent premature usage and
    tracking of sport surfacing materials.

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.