SportMaster · Technical data sheet
Acrylic Crack Patch
Acrylic Crack Patch is a 100% acrylic trowel grade crack filler for cracks or damaged areas up to 1” wide in asphalt or concrete tennis, basketball and pickleball courts, play areas and other sport surfaces. It is used as is, without dilution, worked into the crack with a rectangular trowel or putty knife. The sheet says one gallon typically fills approximately 75-150 feet of cracks, and drying takes from 1 hour up to a full day depending on the repair and conditions. It comes in green, red, neutral and blue.
CMT-7 Revised December 2019 1 page, 76 KB
This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.
Open the PDF (1 page, 76 KB) Key facts
| Use | Cracks or damaged areas in asphalt or concrete surfaces, up to 1” wide |
|---|---|
| Mixing | Use as is; do not dilute |
| Coverage | One gallon fills approximately 75-150 feet of cracks, depending on depth and width |
| Drying time | 1 hour up to a full day, depending on the repair, weather and surface |
| Application temperature | Surface and air above 50°F (10°C) during application and for at least 24 hours after |
| Colors | Green, red, neutral and blue |
Taken from this document. The PDF is SportMaster's official document (CMT-7, revised December 2019).
The full text of this document
This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-7, revised December 2019). If the two ever differ, the PDF is right.
REVISED 12/19 · Technical Data Sheet · ACRYLIC CRACK PATCH · CMT-7
PRODUCT DESCRIPTION & BENEFITS
Acrylic Crack Patch is a 100% acrylic trowel grade crack filler designed for filling cracks or damaged areas in asphalt or concrete surfaces, up to 1” wide.
USES
Asphalt or concrete tennis courts, basketball courts, pickleball courts, play areas, and all-purpose sport surfaces.
COLOR
Available in green, red, neutral and blue.
Chemical Characteristics
% Weight (minimum)
| Acrylic Emulsion | 10.0 |
| Hiding Pigment | .2 |
| Mineral Inert Fillers | 78.0 |
| Film Formers, Additives | 1.8 |
| Water | 8.5 |
Product Data
| Type | Acrylic Emulsion |
| Pounds per gallon at 77°F | 15.2 ± 1 |
| % Non Volatile Material | 80 ± 5 |
| Odor | Slight Ammonia |
| Flammability | Non-Flammable |
| Flash Point | None |
| Storage Life | One Year |
| Colors | Several Available |
SURFACE PREPARATION
Cracks must be cleaned of dust, dirt, and debris including vegetation. Blow clean with air compressor or high pressure washer.
MIXING PROCEDURES
Use as is. DO NOT DILUTE.
APPLICATION
Work Acrylic Crack Patch down into crack using rectangular trowel or putty knife. Wipe off excess material with damp cloth before it dries to prevent material buildup on court surface.
IMPORTANT
Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.
DRYING TIME
1 hour up to a full day, dependng on width and depth of the repair, as well as weather and surface conditions.
COVERAGE
Typically one gallon will fill approximately 75-150 feet of cracks depending on depth and width of crack.
CAUTIONS
Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.
WARRANTY
The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.
Copyright© 2019, SportMaster
All rights reserved.
ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870
Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net
Free estimates
Planning a court or a surface?
Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.
The yard
4000 East 86th Street, Cleveland, OH 44105
Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.
Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.