INDUSTRIAL SURFACE

SportMaster · Guide

ProCushion System maintenance

Extra care points for a SportMaster ProCushion court, beyond the general maintenance manual: how to keep a cushioned surface free of dents, tears and hard repairs. Acrylic coatings take 14 days to reach a full film cure (indoors up to 30 days), so heavy items are kept off, spread on boards and removed quickly. For cracks it recommends flexible CrackMagic; low spots are filled with CushionMaster I & II, or with Acrylic Patch Binder patching mix where deeper than ¼”.

1 page, 204 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

First page of the SportMaster guide for ProCushion System maintenance Open the PDF (1 page, 204 KB)

Key facts

Full film cure14 days
Indoor cureUp to 30 days, depending on indoor humidity level
Heavy equipmentSpread the load on a large board or firm protective pad and remove it as soon as possible
Crack repairSportMaster CrackMagic, an elastomeric or flexible crack sealant
Low spotsAdditional coats of CushionMaster I & II; Acrylic Patch Binder patching mix if deeper than ¼”

Taken from this document. The PDF is SportMaster's official document.

The full text of this document

This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document. If the two ever differ, the PDF is right.

SportMaster ProCushion System – Maintenance

The SportMaster ProCushion system is a premium system that adds multiple layers of rubber granule-containing coats, beneath the colored tennis court surfacing layers. The buildup of these coats provides a softer, cushioned effect to players and minimizes fatigue and shock in the joints and body.

Please follow the SportMaster Maintenance Manual, available at http://www.sportmaster.net/maintenance.shtml, for general maintenance of your court or facility. Here are a few additional points that apply to the ProCushion system:

  • Protect the surface from heavy or damaging items
  • High lifts and other maintenance equipment are a few commonly used facility maintenance items that can cause dents or tears in the cushioned surface.
  • If heavy equipment must be used on the surface, protect and spread out the surface area of the item by placing a large board, or other firm protective pad, on the surface. Make sure to remove the heavy item or device as soon as possible to prevent long-term dents or damage.
  • Acrylic coatings take 14 days to achieve a full film cure. At that point, the film has reached its full strength. Try to avoid putting anything heavy or potentially damaging on the surface at any point, but especially prior to the 14 day point. If the facility is indoors, up to 30 days may be needed (Depending on indoor humidity level. Drying and curing can be slowed down in humid conditions).
  • Benches or bleachers will likely leave a dent in the cushioned surface. Protect the area beneath the legs for best results.
  • Avoid using bicycles, skateboards, scooters, or any other equipment that has hard or sharp edges. Such items can cause damage to the softer cushioned surfaces.
  • ProCushion System Repair
  • When performing future repairs on a ProCushion system, try to use rubberized or flexible acrylic products to make the repairs, if possible. SportMaster CrackMagic is an elastomeric, or flexible crack sealant, that is ideal for filling cracks that may open in the surface. This would complement the softness of the surface vs using a hard crack filling method like Acrylic Patch Binder or similar crack repair
  • Low spots that create ponding of the surface should be filled with additional coats of CushionMaster I & II. CushionMaster II can be built up in layers to do most of the filling and CushionMaster I can fill in small remaining voids before resurfacing. If the low spot is deeper than ¼”, Acrylic Patch Binder patching mix may be used. However, it may leave a slightly noticeable “harder” spot.

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.