INDUSTRIAL SURFACE

SportMaster · Technical data sheet

SkateMaster Coating System

The SkateMaster Coating System is a 100% acrylic emulsion system of one or two coats of Acrylic Resurfacer and two coats of SkateMaster coating, for asphalt or concrete where in-line hockey or roller sports are played, and for multi-purpose sport areas. The sheet gives the tinted resurfacer mix (55 gallons of Neutral Acrylic Resurfacer, 3 gallons of ColorPlus, 800 pounds of 70 mesh or finer sand, 33 gallons of water) and the SkateMaster tint ratios. Coverage is .07 to .09 (resurfacer) and .06 to .08 (SkateMaster) gallons per square yard per coat, with 48 hours of drying before use.

CMT-35 Revised December 2019 2 pages, 127 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

First page of the SportMaster technical data sheet for SkateMaster Coating System Open the PDF (2 pages, 127 KB)

Key facts

UseAsphalt or concrete pavement for in-line hockey or roller sports; multi-purpose sport areas
Resurfacer mixNeutral Acrylic Resurfacer 55 gallons, ColorPlus Pigment Dispersion 3 gallons, Silica Sand 800 pounds (70 mesh or finer), Water 33 gallons
SkateMaster mixNeutral SkateMaster 55 gallons with ColorPlus Pigment 4 gallons (or 30 gallons with 2 gallons); ready to use, do not dilute
Coverage, Acrylic Resurfacer.07 to .09 gallons per square yard per coat (undiluted)
Coverage, SkateMaster.06 to .08 gallons per square yard per coat (ready to use)
Drying time48 hours before use

Taken from this document. The PDF is SportMaster's official document (CMT-35, revised December 2019).

The full text of this document

This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-35, revised December 2019). If the two ever differ, the PDF is right.

REVISED 12/19 · Technical Data Sheet · SKATEMASTER · Coating System · CMT-35

PRODUCT DESCRIPTION & BENEFITS

The SkateMaster Coating System is a 100% acrylic emulsion system consisting of one or two coats of Acrylic Resurfacer and two coats of SkateMaster coating.

USES

The SkateMaster system can be applied to any asphalt or concrete pavement where In-Line Hockey or roller sports is desired. SkateMaster can also be used as a durable surface for multi-purpose sport areas.

COLOR

Neutral. Tintable with ColorPlus Pigment Dispersion.

LEED: SS Credit 7.1: Heat Island Effect: Non-Roof *Specific colors may contribute toward LEED credits.

Product Data - Acrylic Resurfacer

TypeAcrylic Emulsion
Pounds per gallon at 77°F8.5 ± .5
% Non Volatile Material27.5 ± 5.0
OdorSlight Ammonia
FlammabilityNon-Flammable
Flash PointNone
Storage LifeOne Year

Product Data - SkateMaster

TypeAcrylic Emulsion
Pounds per gallon at 77°F8.5
FlammabilityNon-Flammable
ColorSeveral Available
Storage LifeOne Year

SURFACE PREPARATION

Pavement surface must be cleaned entirely of dust, dirt, and debris. Repair of pavement surface defects, depressions and cracks must be completed prior to application. All repairs must be flush and smooth to adjoining surfaces.

New asphalt surfaces must cure 14 to 30 days prior to application.

New concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. Etch surface with acid and thoroughly clean with brooms and water or power washer. Allow concrete slab to thoroughly dry and apply SportMaster Acrylic Adhesion Promoter at a rate of 200-300 square feet per gallon. Allow Acrylic Adhesion Promoter to thoroughly dry before applying successive coatings.

MIXING PROCEDURES

Mix materials to a smooth, uniform consistency.

Neutral Acrylic Resurfacer55 gallons
ColorPlus Pigment Dispersion3 gallons
Silica Sand (70 mesh or finer)800 pounds
Water33 gallons

SkateMaster is ready to use. Do not dilute.

Neutral SkateMaster55 gallons
ColorPlus Pigment4 gallons
Neutral SkateMaster30 gallons
ColorPlus Pigment2 gallons

Up to 7 lbs. per gallon of sand (80-100 mesh) can be added to SkateMaster, if texture is desired on a multipurpose court.

APPLICATION

Apply 1 or 2 coats of Acrylic Resurfacer (depending on pavement porosity), followed by 2 coats of SkateMaster. Allow materials to dry completely between coats. If multiple coats of Acrylic Resurfacer are needed to fill voids in new pavement, use 50-60 mesh sand in base coats of Acrylic Resurfacer. Always use 70 mesh silica sand, or finer, in top coat of Acrylic Resurfacer.

IMPORTANT

Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.

COVERAGE

Yield calculations are based on undiluted gallons of Acrylic Resurfacer. SkateMaster is ready to use with no dilution.

  • Acrylic Resurfacer - .07 to .09 gallons per square yard per coat. (Based upon undiluted material)
  • SkateMaster - .06 to .08 gallons per square yard per coat. (Based upon ready to use material).

Page 2

DRYING TIME

Allow each coat of material to dry thoroughly before applying successive coats. Allow coating to dry for 48 hours prior to use.

CAUTIONS

Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.

WARRANTY

The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.

Copyright© 2019, SportMaster
All rights reserved.

ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870

Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.