SportMaster · Technical data sheet
White Line Paint
White Line Paint is an acrylic emulsion paint for line marking on tennis, basketball and pickleball courts and other asphalt or concrete pavement. It is rolled or brushed between high quality masking tape, which comes off as soon as the paint has dried, and can be given the texture of the court surface by adding silica sand. It covers 500 to 600 lineal feet of 2-inch line per gallon and dries in thirty to sixty (30 to 60) minutes under optimum conditions. Temperatures must stay above 50°F during application and for at least 24 hours after.
CMT-50 Revised December 2019 1 page, 74 KB
This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.
Open the PDF (1 page, 74 KB) Key facts
| Use | Line marking on tennis, basketball and pickleball courts and other asphalt or concrete pavement |
|---|---|
| Application | Rolled or brushed; mask lines with high quality tape and remove it as soon as the paint has dried |
| Coverage | 500 to 600 lineal feet of 2-inch line per gallon |
| Drying time | Thirty to sixty (30 to 60) minutes under optimum drying conditions |
| Application temperature | Above 50°F during application and for at least 24 hours after |
| Color | White |
Taken from this document. The PDF is SportMaster's official document (CMT-50, revised December 2019).
The full text of this document
This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-50, revised December 2019). If the two ever differ, the PDF is right.
REVISED 12/19 · Technical Data Sheet · WHITE LINE PAINT · CMT-50
USES
Line marking on tennis courts, basketball courts, pickleball courts, and other asphalt or concrete pavement surfaces.
COLOR
Available in white.
Product Data
| Type | Acrylic Emulsion |
| Pounds per gallon at 77°F | 10.5 ± .5 |
| % Non Volatile Material | 49 ± 2 |
| Odor | Ammonia |
| Flammability | Non-Flammable |
| Flash Point | None |
| Storage Life | One Year |
SURFACE PREPARATION
Pavement surface must be cleaned entirely of dust, dirt, debris and all loose material. If using White Line Paint on a new, uncoated surface, allow adequate curing time before application.
MIXING PROCEDURES
White Line Paint can be rolled or brushed. To assure crisp lines, it is advisable to use a high quality tape to mask lines. Remove tape as soon as White Line Paint has dried. White Line Paint can be modified to match the exact texture of the court surface by adding silica sand.
IMPORTANT
Stir before using. Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. On outdoor concrete surfaces, assure adequate and functional perimeter drains as well as a sound vapor barrier beneath the slab.
DRYING TIME
Thirty to sixty (30 to 60) minutes under optimum drying conditions. Indoor applications are substantially affected by temperature and available ventilation and will dry more slowly.
COVERAGE
500 to 600 lineal feet of 2-inch line per gallon.
CAUTIONS
Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.
WARRANTY
The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.
Copyright© 2019, SportMaster
All rights reserved.
ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870
Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net
Free estimates
Planning a court or a surface?
Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.
The yard
4000 East 86th Street, Cleveland, OH 44105
Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.
Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.