INDUSTRIAL SURFACE

SportMaster · Technical data sheet

Acrylic Adhesion Promoter

Acrylic Adhesion Promoter is a clear drying, one part water based acrylic emulsion that primes asphalt and concrete pavement and promotes the adhesion of SportMaster acrylic color coatings. It is applied as is, never diluted, as a thin coat by roller, spray or broom at 200 - 300 square feet per gallon, and dries in 45 -90 minutes under optimum conditions. The sheet also covers preparing concrete: a 28 day cure, a broom finish, and etching with phosphoric or muriatic acid.

CMT-21 Revised December 2019 1 page, 74 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

First page of the SportMaster technical data sheet for Acrylic Adhesion Promoter Open the PDF (1 page, 74 KB)

Key facts

UsePrimes asphalt and concrete pavement and promotes adhesion of SportMaster acrylic color coatings
MixingStir thoroughly; apply as is, do not dilute
CoverageApproximately 200 - 300 square feet per gallon, depending on surface porosity
Drying timeForty-five to ninety (45 -90) minutes under optimum conditions
Application temperatureSurface and air above 50°F (10°C) during application and for at least 24 hours after
ColorMilky white, clear when dry

Taken from this document. The PDF is SportMaster's official document (CMT-21, revised December 2019).

The full text of this document

This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-21, revised December 2019). If the two ever differ, the PDF is right.

REVISED 12/19 · Technical Data Sheet · ACRYLIC ADHESION PROMOTER · CMT-21

PRODUCT DESCRIPTION & BENEFITS

Acrylic Adhesion Promoter is a clear drying, one part water based acrylic emulsion. It is designed to prime asphalt and concrete pavement surfaces and promote the adhesion of SportMaster Acrylic Color Coating Products.

COLOR

Milky white, clear when dry.

Chemical Characteristics

ClassificationAcrylic Emulsion
Weight Per Gallon @ 77°F8.7 ± .5 pounds
FlammabilityNon Flammable
Flash PointNone
Storage LifeOne Year

SURFACE PREPARATION

Asphalt: Pavement surface must be cleaned entirely of dust, dirt, debris and all loose materials. Repair of pavement surface defects, depressions and cracks should be complete prior to application.

Concrete: New concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. Etch surface with phosphoric or muriatic acid and rinse thoroughly with water. Allow concrete to dry completely before applying Acrylic Adhesion Promoter.

MIXING PROCEDURES

Stir thoroughly before using. Apply Acrylic Adhesion Promoter as is. DO NOT DILUTE.

APPLICATION

Use roller, spray, or broom to apply. Apply a thin coat of Acrylic Adhesion Promoter at the rate of 200 - 300 square feet per gallon. Do not leave excess build-up of material on surface. Allow Acrylic Adhesion Promoter to dry completely before applying SportMaster Coating Products.

IMPORTANT

Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.

DRYING TIME

Forty-Five to Ninety (45 -90) minutes under optimum conditions.

COVERAGE

Approximately 200 - 300 square feet per gallon depending on surface porosity.

CAUTIONS

Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.

WARRANTY

The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.

Copyright© 2019, SportMaster
All rights reserved.

ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870

Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.