SportMaster · Technical data sheet
Crack Magic
Crack Magic is a 100% acrylic elastomeric crack sealant, fortified with fibers and select mineral fillers, for cracks up to 1/2” wide in asphalt or concrete sport pavement; it provides a barrier against moisture intrusion. It is ready to use, applied with a putty knife or trowel, and sold in one-gallon pails in green, red and neutral. Typically one gallon fills approximately 75-150 feet of cracks. The sheet states that it has less than 50 grams per liter VOC and meets material requirements when tested to the ASTM methods it lists, with a table of results.
CMT-9 Revised December 2019 2 pages, 124 KB
This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.
Open the PDF (2 pages, 124 KB) Key facts
| Use | Cracks up to 1/2” wide in asphalt or concrete pavement |
|---|---|
| Mixing | Ready to use, do not dilute; neutral can be tinted with ColorPlus |
| Coverage | Approximately 75-150 feet of cracks per gallon |
| Application temperature | Not to be applied when temperature is expected to drop below 50°F within 24 hours after |
| Packaging | One-gallon pails |
| Colors | Green, red and neutral |
Taken from this document. The PDF is SportMaster's official document (CMT-9, revised December 2019).
The full text of this document
This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-9, revised December 2019). If the two ever differ, the PDF is right.
REVISED 12/19 · Technical Data Sheet · CRACK MAGIC · CMT-9
PRODUCT DESCRIPTION & BENEFITS
Crack Magic is a 100% acrylic elastomeric crack sealant designed for sealing cracks in asphalt and concrete pavement sport surfaces. It provides a protective barrier against moisture intrusion into pavement surfaces. Crack Magic is both economical and easy to use.
USES
Crack Magic is designed for filling cracks up to 1/2” wide in asphalt or concrete pavement. Ideal for use in concrete expansion joints.
COMPOSITION
Crack Magic is a 100% acrylic elastomeric crack sealant fortified with fibers and select mineral fillers.
SIZES
Crack Magic is available in one-gallon pails.
COLOR
Available in green, red, and neutral colors.
Chemical & Physical Analysis
| Classification. | 100% Acrylic Emulsion |
| Weight per gallon @ 77°F | Approx. 8.8 ± .5 lbs. |
| Color | Dark Gray to Black when dry |
| Non-Volatiles (%) | Approx. 61 ± 5% |
| Drying Time | Dependant upon filler depth |
| Adhesion & Resistance to Water | Non Penetration or Loss of Adhesion |
| Resistant to Heat | No Blistering or Sagging |
| Flexibility | No Cracking or Flaking |
| Resistance to Impact. | No Chipping, Flaking, or Cracking |
| Effects of Accelerated Weathering | PASSES |
LIMITATIONS
Crack Magic shall not be applied when temperature is expected to drop below 50°F at any time within a 24 hour period immediately following application.
TECHNICAL DATA
Environmental Considerations: Crack Magic is a nonhazardous environmentally friendly waterbased crack sealant containing less than 50 grams per liter volatile organic content (VOC).
PHYSICAL/CHEMICAL PROPERTIES
Crack Magic meets the following material requirements when tested in accordance with ASTM C661, ASTM C719, ASTM C793, ASTM C794, ASTM D4758. (See chart).
INSTALLATION
Cracks must be cleaned of all dirt, debris, and vegetation prior to application of crack sealant.
METHODS
One Gallon Pails: Apply crack sealant with putty knife or trowel.
MIXING PROCEDURES
Crack Magic is a ready-to-use product. Do not dilute. Neutral Crack Magic can be tinted with ColorPlus pigment dispersion to achieve additional colors.
APPLICATION
Fill cracks completely with crack sealant. Smooth flush to adjoining pavement with putty knife or trowel. Feather edges for smooth transition to playing surface. Allow material to dry before opening to play or applying acrylic sport coatings.
IMPORTANT
Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.
ESTIMATING MATERIAL REQUIREMENTS
Coverage is dependent upon depth and width of cracks. Typically, one gallon of Crack Magic will fill approximately 75-150 feet of cracks.
PRECAUTIONS
Both surface and ambient temperature shall be a minimum of 50°F. Temperature shall not drop below 50°F within a 24 hour period following application.
TECHNICAL SERVICES
Manufacturer: Complete product specifications, material safety data sheets, and technical assistance is available from the manufacturer.
Professional Applicators: Your local applicator is available to provide on-site inspections and recommendations to meet your specific needs.
CAUTIONS
Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.
Page 2
WARRANTY
The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.
Copyright© 2019, SportMaster
All rights reserved.
ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870
Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net
Free estimates
Planning a court or a surface?
Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.
The yard
4000 East 86th Street, Cleveland, OH 44105
Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.
Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.