INDUSTRIAL SURFACE

SportMaster · Technical data sheet

Stripe-Rite

Stripe-Rite is a 100% acrylic clear drying emulsion primer for line striping. It is brushed or rolled on before SportMaster Line Paint to fill the minor voids between the masking tape and the court surface, so that lines come out crisp. It primes line markings on asphalt, concrete or color coated surfaces, covers 500 to 600 lineal feet of 2 inch line per gallon, and dries in thirty to sixty (30 to 60) minutes under optimum conditions. It goes on milky white and dries clear.

CMT-14 Revised December 2019 1 page, 76 KB

Open the PDF Ask us about it

This is SportMaster's document, kept here so our customers and crews can read it beside our own pages. SportMaster's own copy is on sportmaster.net.

First page of the SportMaster technical data sheet for Stripe-Rite Open the PDF (1 page, 76 KB)

Key facts

UsePriming line markings on asphalt, concrete or color coated surfaces
ApplicationRoller or brush; dry completely before SportMaster Line Paint
Coverage500 to 600 lineal feet of 2 inch line per gallon
Drying timeThirty to sixty (30 to 60) minutes under optimum drying conditions
Application temperatureSurface and air above 50°F (10°C) during application and for at least 24 hours after
ColorMilky white, clear when dried

Taken from this document. The PDF is SportMaster's official document (CMT-14, revised December 2019).

The full text of this document

This is the document's own text, moved from the PDF by machine, word for word, and checked against it. The PDF is SportMaster's official document (CMT-14, revised December 2019). If the two ever differ, the PDF is right.

REVISED 12/19 · Technical Data Sheet · STRIPE-RITE · CMT-14

PRODUCT DESCRIPTION & BENEFITS

Stripe-Rite is a 100% acrylic clear drying emulsion primer for line striping. Stripe-Rite is applied prior to SportMaster Line Paint to fill the minor voids between the masking tape and the court surface to assure crisp, razor sharp lines.

USES

For priming line markings on any asphalt, concrete or color coated surface.

COLOR

Milky White. Clear when dried.

Chemical Characteristics

% Weight (Nominal)

Acrylic Emulsion38.0
Hiding Pigment0.0
Mineral Inert Fillers7.0
Film Formers, Additives1.5
Water50.0

Product Data

TypeAcrylic Emulsion
Pounds per gallon at 77°F8.9 ± .5
% Non Volatile Material29 ± 5
OdorSlight Ammonia
FlammabilityNon-Flammable
Flash PointNone
Storage LifeOne Year
ColorsMilky White, clear when dry

SURFACE PREPARATION

Pavement Surface must be cleaned of dust, dirt, debris and all loose material.

APPLICATION

Stripe-Rite can be applied by roller or brush. Allow Stripe-Rite to dry completely before applying SportMaster Line Paint.

IMPORTANT

Surface and air temperatures must be above 50°F (10°C) during application and for at least 24 hours after application. Stir before using. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.

DRYING TIME

Thirty to sixty (30 to 60) minutes under optimum drying conditions. Indoor applications are substantially affected by temperature and available ventilation and will dry more slowly.

COVERAGE

500 to 600 lineal feet of 2 inch line per gallon.

CLEAN-UP

Wash tools in water before material dries.

CAUTIONS

Do not store in direct sunlight or where temperatures exceed 100°F. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. Refer to product Safety Data Sheet (SDS) for additional safety information and precautions.

WARRANTY

The statements made on this technical bulletin are believed to be true and accurate, and are intended to provide a guide for approved construction practices. Manufacturer does not make, nor does it authorize any agent or representative to make any warranty, express or implied, concerning this material as workmanship, weather, construction, equipment utilized and other variables affecting results are all beyond our control. Manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. In no event shall Manufacturer be liable for any injury, loss or damage, either direct or incidental, special or consequential, however arising, in connection with material or equipment furnished or work performed. Manufacturer shall not, in any manner, be liable for any defects, variations or change in condition in the substructure over which its products are installed.

Copyright© 2019, SportMaster
All rights reserved.

ThorWorks Industries, Inc.
P.O. Box 2277
Sandusky, OH 44870

Phone: 1-800-326-1994 FAX: 1-419-626-5477 www.sportmaster.net

Free estimates

Planning a court or a surface?

Industrial Surface is a SportMaster authorized installer in Northeast Ohio. Send the address and what you have in mind; we walk the site, measure it, and send a written proposal with the scope spelled out.

The yard

4000 East 86th Street, Cleveland, OH 44105

Off Broadway Avenue, south of downtown, ten minutes from I-77 and I-490.

Serving Cuyahoga, Summit, Lake, Lorain, Medina, Geauga, Portage, Stark and Ashtabula counties. Municipal, school, club, HOA and commercial work; residential courts by the job.